1.Identification
1.1 GHS Product identifier
| Product name | hexadecan-1-ol |
|---|
1.2 Other means of identification
| Product number | - |
|---|---|
| Other names | 1-Hexadecanol |
1.3 Recommended use of the chemical and restrictions on use
| Identified uses | For industry use only. Food additives -> Flavoring Agents |
|---|---|
| Uses advised against | no data available |
1.4 Supplier's details
1.5 Emergency phone number
| Emergency phone number | - |
|---|---|
| Service hours | Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours). |
2.Hazard identification
2.1 Classification of the substance or mixture
Not classified.
2.2 GHS label elements, including precautionary statements
| Pictogram(s) | No symbol. |
|---|---|
| Signal word | No signal word. |
| Hazard statement(s) | none |
| Precautionary statement(s) | |
| Prevention | none |
| Response | none |
| Storage | none |
| Disposal | none |
2.3 Other hazards which do not result in classification
none
3.Composition/information on ingredients
3.1 Substances
| Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
|---|---|---|---|---|
| hexadecan-1-ol | hexadecan-1-ol | 36653-82-4 | none | 100% |
4.First-aid measures
4.1 Description of necessary first-aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms/effects, acute and delayed
no data available
4.3 Indication of immediate medical attention and special treatment needed, if necessary
Basic Treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for shock and treat if necessary ... . Monitor for pulmonary edema and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Administer activated charcoal ... . /Higher alcohols (>3 carbons) and related compounds/
5.Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
To fight fire, use foam, carbon dioxide, dry chemical.
5.2 Specific hazards arising from the chemical
no data available
5.3 Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
6.Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
AEROBIC: In a 5-day incubation study using an activated sludge seed from a municipal sewage treatment plant, 28.0% of initial 1-hexadecanol was mineralized (CO2 measurement)(1). A theoretical BOD of 0% was observed using the AFNOR (the French norm procedure) screening test and a 5-day incubation period(2). In standard 5-day BOD tests using emulsified 1-hexadecanol, 30-60% of initial 1-hexadecanol was oxidized(3). In studies designed to examine the biodegradability of 1-hexadecanol in thin films (monolayer) on water surfaces, it was found that biological destruction of the monolayer resulted in measurable consumption of the material with all substrates that were tested; substrates included 2% settled domestic sewage in BOD dilution water, 50% Ohio River water + 50% BOD dilution water, water from a stock pond near San Antonio, TX, and other combinations of BOD dilution water and mineral supplements; oxidation rates varied with substrates; oxidation rates varied from 6.2 to 14.3% over incubation periods of 20 to 48 days(3). In Warburg respirometer tests using activated sludge and 500 mg/L of 1-hexadecanol (well above its aqueous solubility), the theoretical oxygen demand was only 0.4% after a 12-hr incubation period(4). In static culture tests examining the disappearance of 1-hexadecanol in seeded media as compared to unseeded control media over a 10-day incubation period, almost none disappeared from the control media while nearly 20% disappeared from the seeded media; in shake flask tests using seeded media and a fine granular form of 1-hexadecanol, the initial 1-hexadecanol concn of 100 mg/L decreased to only 0.25 mg/L after 30 days of incubation; the overall results of the study concluded that given sufficient time in contact with adapted microbial species under conditions otherwise non-limiting, the complete disappearance of 1-hexadecanol as an identifiable molecular species will occur; one limiting condition is the relative insolubility of 1-hexadecanol in water; it was found that microbial growth occurs more rapidly when the 1-hexadecanol substrate is added in dissolved form (eg hexane solution)(5).
7.Handling and storage
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
In general, materials which are toxic as stored or which can decompose into toxic components ... should be stored in a cool, well-ventilated place, out of direct rays of the sun, away from areas of high fire hazard, and should be periodically inspected ... incompatible materials should be isolated from each other.
8.Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure limit values
no data available
Biological limit values
no data available
8.2 Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Respiratory protection
Wear dust mask when handling large quantities.
Thermal hazards
no data available
9.Physical and chemical properties
| Physical state | white solid |
|---|---|
| Colour | FLAKES FROM ETHYL ACETATE |
| Odour | Faint odor |
| Melting point/ freezing point | -80°C(lit.) |
| Boiling point or initial boiling point and boiling range | 190°C/15mmHg(lit.) |
| Flammability | no data available |
| Lower and upper explosion limit / flammability limit | no data available |
| Flash point | 170°C |
| Auto-ignition temperature | no data available |
| Decomposition temperature | no data available |
| pH | no data available |
| Kinematic viscosity | 53 mPa-s (=cP) at 75°C |
| Solubility | In water:insoluble |
| Partition coefficient n-octanol/water (log value) | log Kow = 6.83 (est) |
| Vapour pressure | <0.01 mm Hg ( 43 °C) |
| Density and/or relative density | 0.818?g/mL?at 25?°C(lit.) |
| Relative vapour density | 8.34 (vs air) |
| Particle characteristics | no data available |
10.Stability and reactivity
10.1 Reactivity
no data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Flammable when exposed to heat or flame
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
no data available
10.6 Hazardous decomposition products
When heated to decomposition it emits acrid smoke and fumes.
11.Toxicological information
Acute toxicity
- Oral: LD50 Rat oral 5 g/kg
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
12.Ecological information
12.1 Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: EC50 Scenedesmus subspicatus (Algae) 676 mg/L/72 hr; Effect: cell multiplication inhibition test
- Toxicity to microorganisms: no data available
12.2 Persistence and degradability
AEROBIC: In a 5-day incubation study using an activated sludge seed from a municipal sewage treatment plant, 28.0% of initial 1-hexadecanol was mineralized (CO2 measurement)(1). A theoretical BOD of 0% was observed using the AFNOR (the French norm procedure) screening test and a 5-day incubation period(2). In standard 5-day BOD tests using emulsified 1-hexadecanol, 30-60% of initial 1-hexadecanol was oxidized(3). In studies designed to examine the biodegradability of 1-hexadecanol in thin films (monolayer) on water surfaces, it was found that biological destruction of the monolayer resulted in measurable consumption of the material with all substrates that were tested; substrates included 2% settled domestic sewage in BOD dilution water, 50% Ohio River water + 50% BOD dilution water, water from a stock pond near San Antonio, TX, and other combinations of BOD dilution water and mineral supplements; oxidation rates varied with substrates; oxidation rates varied from 6.2 to 14.3% over incubation periods of 20 to 48 days(3). In Warburg respirometer tests using activated sludge and 500 mg/L of 1-hexadecanol (well above its aqueous solubility), the theoretical oxygen demand was only 0.4% after a 12-hr incubation period(4). In static culture tests examining the disappearance of 1-hexadecanol in seeded media as compared to unseeded control media over a 10-day incubation period, almost none disappeared from the control media while nearly 20% disappeared from the seeded media; in shake flask tests using seeded media and a fine granular form of 1-hexadecanol, the initial 1-hexadecanol concn of 100 mg/L decreased to only 0.25 mg/L after 30 days of incubation; the overall results of the study concluded that given sufficient time in contact with adapted microbial species under conditions otherwise non-limiting, the complete disappearance of 1-hexadecanol as an identifiable molecular species will occur; one limiting condition is the relative insolubility of 1-hexadecanol in water; it was found that microbial growth occurs more rapidly when the 1-hexadecanol substrate is added in dissolved form (eg hexane solution)(5).
12.3 Bioaccumulative potential
In a 3-day static exposure study using golden orfe fish (Leuciscus idus melanotus), a 1-hexadecanol bioconcentration factor (BCF) of 56 was observed(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC), provided the compound is not metabolized by the organism(SRC). A 24-hr BCF of 17000 was observed in algae (Chlorella fusca)(1).
12.4 Mobility in soil
The Koc of 1-hexadecanol is estimated as 25,000(SRC), using a water solubility of 4.122X10-2(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that 1-hexadecanol is expected to be immobile in soil.
12.5 Other adverse effects
no data available
13.Disposal considerations
13.1 Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
14.Transport information
14.1 UN Number
| ADR/RID: Not dangerous goods. | IMDG: Not dangerous goods. | IATA: Not dangerous goods. |
14.2 UN Proper Shipping Name
| ADR/RID: unknown |
| IMDG: unknown |
| IATA: unknown |
14.3 Transport hazard class(es)
| ADR/RID: Not dangerous goods. | IMDG: Not dangerous goods. | IATA: Not dangerous goods. |
14.4 Packing group, if applicable
| ADR/RID: Not dangerous goods. | IMDG: Not dangerous goods. | IATA: Not dangerous goods. |
14.5 Environmental hazards
| ADR/RID: no | IMDG: no | IATA: no |
14.6 Special precautions for user
no data available
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
no data available
15.Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
| Chemical name | Common names and synonyms | CAS number | EC number |
|---|---|---|---|
| hexadecan-1-ol | hexadecan-1-ol | 36653-82-4 | none |
| European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
| EC Inventory | Listed. | ||
| United States Toxic Substances Control Act (TSCA) Inventory | Listed. | ||
| China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
| New Zealand Inventory of Chemicals (NZIoC) | Listed. | ||
| Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Listed. | ||
| Vietnam National Chemical Inventory | Listed. | ||
| Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Listed. | ||
16.Other information
Information on revision
| Creation Date | Aug 11, 2017 |
|---|---|
| Revision Date | Aug 11, 2017 |
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
