A sustainable solution for removal of Glutaraldehyde (cas 111-30-8) in saline water with visible light photocatalysis

Add time:08/25/2019    Source:sciencedirect.com

Glutaraldehyde (cas 111-30-8) (GA) is the most common biocide used in unconventional oil and gas production. Photocatalytic degradation of GA in brine simulating oil and gas produced water using Ag/AgCl/BiOCl composite as a photocatalyst with visible light was investigated. Removal of GA at 0.1 mM in 200 g/L NaCl solution at pH 7 was 90% after 75 min irradiation using 5 g/L of the photocatalyst. The GA removal followed pseudo-first order reaction with a rate constant of 0.0303 min−1. At pH 5 or at 300 g/L NaCl, the photocatalytic removal of GA was almost completely inhibited. Similar inhibitions were observed when adding dissolved organic carbon (from humic acid) at 10 and 200 mg/L, or Br− at 120 mg/L to the system. The removal rate of GA markedly increased with increasing pH (5–9), photocatalyst loading (2–8 g/L) and under 350 nm UV (compared to visible light). On the contrary, the removal rate of GA markedly decreased with increasing NaCl and initial GA concentrations (0–300 g/L for NaCl and 0.1–0.4 mM for GA). A quenching experiment was also conducted; electron holes (h+) and superoxide () were found as the main reactive species responsible for the removal of GA while OH had a very limited effect.

We also recommend Trading Suppliers and Manufacturers of Glutaraldehyde (cas 111-30-8). Pls Click Website Link as below: cas 111-30-8 suppliers

Prev:Oriented covalent immobilization of recombinant protein A on the Glutaraldehyde (cas 111-30-8) activated agarose support
Next:Original ArticleEffect of 0.5% Glutaraldehyde (cas 111-30-8) disinfection on surface wettability of elastomeric impression materials)