Removal of impurities from SCANDIUM CHLORIDE (cas 10361-84-9) solution using 732-type resin

Add time:07/28/2019    Source:sciencedirect.com

The deep removal of Al, Fe(Ⅱ/Ⅲ), Ca, Zr, Ti and Si from SCANDIUM CHLORIDE (cas 10361-84-9) solution was carried out by using 732-type strong acid cation exchange resin. The effects of pH value, contact time and complexing agents (EDTA) on the purification process are investigated. The results indicate that the 732-type resin have a good scandium selectivity and the adsorption order is Sc > Fe(Ⅲ)>Al > Ca > Zr > Ti > Si in the pH range of 1–3. The separation of Sc and Zr, Si, Ti can be directly carried out because the resin have a good adsorption effect on Sc, Al and Fe(Ⅲ) but poor adsorption effect on Zr, Si and Ti under the condition of pH = 2.5 and contact time 180 min. The Fe(Ⅱ), Ca and Al are selectively adsorbed on the resin by adding reducing agent ascorbic acid and EDTA into the solution for reducing Fe(Ⅲ) to Fe(Ⅱ) and complexing Sc. By using two-step ion exchange adsorption separation method, the removal rates of Fe(Ⅲ), Ti, Al, Ca, Zr and Si are 95.5%, 99.8%, 100%, 98.2%, 98.6% and 100%, respectively.

We also recommend Trading Suppliers and Manufacturers of SCANDIUM CHLORIDE (cas 10361-84-9). Pls Click Website Link as below: cas 10361-84-9 suppliers

Prev:Yellow-green electroluminescence of samarium complexes of 8-hydroxyquinoline
Next:Synthesis, 45Sc NMR characterization, and interconversion of structurally diverse SCANDIUM CHLORIDE (cas 10361-84-9) hydrates)