Basic Information | Post buying leads | Suppliers | Cas Database |
Name |
Acetic acid,praseodymium(3+) salt (3:1) |
EINECS | 228-242-4 |
CAS No. | 6192-12-7 | Density | 1.2g/cm3 |
PSA | 78.90000 | LogP | -0.04070 |
Solubility | soluble in water, insoluble in ethanol and pyridine | Melting Point |
N/A |
Formula | C2H4O2.1/3Pr | Boiling Point | 117.1 °C at 760 mmHg |
Molecular Weight | 318.042 | Flash Point | 40 °C |
Transport Information | N/A | Appearance | green solid with moisture absorption |
Safety | 26-36/37/39 | Risk Codes | 36/37/38 |
Molecular Structure | Hazard Symbols | N/A | |
Synonyms |
Praseodymium acetate (6CI,7CI);Praseodymium (III) acetate;Praseodymium acetate (Pr(OAc)3);Praseodymiumtriacetate;Praseodymium(3+) acetate;Praseodymium acetate, trihydrate;AC1L4WO9;AR-1L1697;CID165418; |
Article Data | 8 |
The Acetic acid,praseodymium(3+) salt (3:1) with CAS registry number of 6192-12-7 is also known as Praseodymium acetate, trihydrate. The IUPAC name is Praseodymium(3+) triacetate. Its EINECS registry number is 228-242-4. This chemical is a green solid with moisture absorption. It's stable at normal temperature and pressure, and it should be sealed in a ventilated and dry place. In addition, the formula is C2H4O2.1/3Pr and the molecular weight is 106.01.
Physical properties about Acetic acid,praseodymium(3+) salt (3:1) are: (1)ACD/LogP: -0.29; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): -1.07; (4)ACD/LogD (pH 7.4): -2.86; (5)ACD/BCF (pH 5.5): 1; (6)ACD/BCF (pH 7.4): 1; (7)ACD/KOC (pH 5.5): 2.73; (8)ACD/KOC (pH 7.4): 1; (9)#H bond acceptors: 2; (10)#H bond donors: 1; (11)#Freely Rotating Bonds: 0; (12)Polar Surface Area: 37.3Å2; (13)Flash Point: 40 °C; (14)Enthalpy of Vaporization: 23.7 kJ/mol; (15)Boiling Point: 117.1 °C at 760 mmHg; (16)Vapour Pressure: 13.9 mmHg at 25 °C.
Preparation of Acetic acid,praseodymium(3+) salt (3:1): Add 10 g praseodymium oxide(Pr6O11) to 500 mL 50% acetic acid solution, heated in sand bath. If there is still a small amount of insoluble matter after 1 or 2 days, filtered into a clear liquid, steamed until most of the water evaporated at 75 °C in water bath, cooling to get sticky things. At last, dried by vacuum to get hydrated praseodymium acetate (Ⅲ).
When you are using this chemical, please be cautious about it. As a chemical, it is irritating to eyes, respiratory system and skin. During using it, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure:
1. SMILES: [Pr+3].O=C([O-])C.[O-]C(=O)C.[O-]C(=O)C
2. InChI: InChI=1/3C2H4O2.Pr/c3*1-2(3)4;/h3*1H3,(H,3,4);/q;;;+3/p-3
3. InChIKey: KPXRPRLCONABEG-DFZHHIFOAZ
4. Std. InChI: InChI=1S/3C2H4O2.Pr/c3*1-2(3)4;/h3*1H3,(H,3,4);/q;;;+3/p-3
5. Std. InChIKey: KPXRPRLCONABEG-UHFFFAOYSA-K